R410A Refrigerant Gas
R410A is an almost azeotropic HFC blend mainly used in medium and high temperature applications . It is a substitute for the R22 . It is composed of R32 and R125 , each at 50 % by weight . Its temperature creep ( glide ) is about 0.1 K. For this reason it can be handled as a pure fluid and can be loaded in both liquid and gaseous phase.
| Sigle | GWP | Glide (K) | Component | % |
| R410A | 2088 | 0,1 | R32 (difluoromethane CH2F2) | 50 |
| R125 (pentafluoroethane C2HF5) | 50 |
Are you interested in our R410A refrigerant gas?
Send mail to [email protected] for more information or for a customized quote.
Boiling point: -51,5°C
PH: 49 Barg
UN Number: 1078
ADR class: 2.2 A
ADR upper number: 20
Safety group: A1/A1
- European Regulation 517 of 2014 ordered that from 2025 R410A is no longer used in air conditioning systems monosplit with loads of less than 3 kg . It will be replaced dall’R32 , which presents a much lower GWP.
- Its high pressures , the high density and the good heat exchange capacity allow to use refrigeration components of small size , with the same cooling capacity. In particular plants to allow the use of R410A evaporators , compressors and more pipes small equal power output compared to R22.
- As a result of the smaller size of the plant also the refrigerant charge is less , to surrender power parity.
- From energetic point of view R410A offers better energy efficiency (COP) than R22.
Consisting of HFC, R410A requires the use of POE.
R410A refrigerant gas mini line:
- 1L cylinder (800 g)
- 2.5L cylinder (1900 g)
R410A refrigerant gas medi line:
- 8L cylinder (5 kg)
- 12.7L cylinder (10 kg)
- 40L cylinder (35 kg)
R410A refrigerant gas maxi line:
- 790 kg drum
See on Transport and Delivery
